INVITECH Precision is a manufacturer of precision metal stamping and metal insert injection molding. Its core technical team has focused on precision metal stamping and metal insert injection molding for more than 30 years. We promote 5S site management, TPM equipment management and pass the IATF16949 quality system certification. So today, our engineers from INVITECH Precision will share with you 6 precautions for precision metal stamping processing:

1. Check whether the moving part is filled with lubricating oil before mechanical work, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty.

2. Maintain the correct posture at work and have sufficient energy to cope with the work. If you find that you are unwell, you should leave the job immediately and report to the leader. It is necessary to concentrate your thoughts during operation, chat, and cooperate with each other. The operator should not operate in a state of irritability and fatigue to avoid accidents and ensure that there is no problem with the operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Wearing slippers, high-heeled shoes and other clothing is not allowed, and those with long hair must wear protective caps.

3. Turn off the power first when changing the mold, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand to test punch twice to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position.

4. It is necessary to wait for all other personnel to leave the working area of ​​the machine and remove the sundries on the workbench before starting the power supply to start the machine.

5. When the machine is working, it is forbidden to reach into the working area of ​​the slider, and it is strictly forbidden to pick up and place the workpiece by hand. Use standard tools when picking and placing the workpiece in the die. If any abnormal sound or malfunction of the machine is found, the power switch should be turned off immediately for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or the foot switch board, let alone put their hands in the working area of ​​the machine or touch the moving parts of the machine with their hands.

6. When leaving get off work, turn off the power and arrange the finished products, side materials and sundries on the post to ensure that the working environment is clean and free from accidents.